Preparation and Inverstigation of MEH-PPV Films Used for White Light Emitting Diodes
Author affiliations
DOI:
https://doi.org/10.15625/0868-3166/21/2/111Abstract
With the aim to prepare white Light Emitting Diode (WLED), the conjugate polymer films like (Poly[2-methoxy-5-(2'-ethyl-hexyloxy)-1,4-phenylene vinylene] (MEH-PPV) were investigated. Spectroscopic (absorption and emission) spectra of the MEH-PPV films showed that this polymer is suitable for casting onto the chips of the blue InGaN LED to make WLED. The luminous flux measured on the WLEDs in the integrating sphere proved that the white light emission can be obtained from the combination of inorganic LED and conjugate (MEH-PPV) polymers with an optimal thickness and a high quality. The aging process of MEH-PPV films was found to be strongly dependent post-treatment conditions. Reasonable heat treatment condition for the MEH-PPV polymers was suggested as in vacuum of 5×10-2 Pa at a temperature of 120°C in, for 2 hous.Downloads
Downloads
Published
How to Cite
Issue
Section
License
Communications in Physics is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Copyright on any research article published in Communications in Physics is retained by the respective author(s), without restrictions. Authors grant VAST Journals System (VJS) a license to publish the article and identify itself as the original publisher. Upon author(s) by giving permission to Communications in Physics either via Communications in Physics portal or other channel to publish their research work in Communications in Physics agrees to all the terms and conditions of https://creativecommons.org/licenses/by-sa/4.0/ License and terms & condition set by VJS.


