Influence Of Fabrication Condition on the Microstructural and Optical Properties of Lead-Free Ferroelectric Bi\(_{0.5}\)Na\(_{0.5}\)TiO\(_{3}\) Materials

Le Thi Hai Thanh, Nguyen Hoang Tuan, Luong Huu Bac, Dang Duc Dung, Phung Quoc Bao
Author affiliations

Authors

  • Le Thi Hai Thanh School of Engineering Physics, Hanoi University of Science and Technology
  • Nguyen Hoang Tuan NGUYEN HOANG TUAN, LUONG HUU BAC, AND DANG DUC DUNG
  • Luong Huu Bac School of Engineering Physics, Hanoi University of Science and Technology
  • Dang Duc Dung School of Engineering Physics, Hanoi University of Science and Technology
  • Phung Quoc Bao Faculty of Physics, College of Science, Vietnam National University, Hanoi

DOI:

https://doi.org/10.15625/0868-3166/26/1/7354

Keywords:

lead-free, Bi0.5Na0.5TiO3, optical, and sol-gel.

Abstract

Lead-free ferroelectric materials have attracted considerable attention due to the increasing potential application in environmental benign materials. Among lead-free ferroelectric materials, the Bi0.5Na0.5TiO3 (BNT) materials were more studied because it exhibited the good ferroelectric and piezoelectric properties which could be promising candidate materials replacing Pb(Zr,Ti)O3. In this work, the lead-free ferroelectric BNT materials were synthesized by sol-gel method. The effects of fabrication process to microstructural and optical properties were studied which includes Na precursor concentration and calcining temperature. The result indicated that the Na precursor concentration were higher 40 mol.% and the calcining temperatures

Downloads

Download data is not yet available.

Downloads

Published

15-07-2016

How to Cite

[1]
L. T. H. Thanh, N. H. Tuan, L. H. Bac, D. D. Dung, and P. Q. Bao, “Influence Of Fabrication Condition on the Microstructural and Optical Properties of Lead-Free Ferroelectric Bi\(_{0.5}\)Na\(_{0.5}\)TiO\(_{3}\) Materials”, Comm. Phys., vol. 26, no. 1, p. 51, Jul. 2016.

Issue

Vol. 26 No. 1 (2016)

Section

Papers

License

Communications in Physics is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Copyright on any research article published in Communications in Physics is retained by the respective author(s), without restrictions. Authors grant VAST Journals System (VJS) a license to publish the article and identify itself as the original publisher. Upon author(s) by giving permission to Communications in Physics either via Communications in Physics portal or other channel to publish their research work in Communications in Physics agrees to all the terms and conditions of https://creativecommons.org/licenses/by-sa/4.0/ License and terms & condition set by VJS.